How to Prevent Holiday Electrical Circuit Overload

December 14, 2020 4:05 pm Published by Leave your thoughts

Hanging holiday lights inside and out is a great way to bring cheer to your family and the entire neighborhood—that is, until the lights suddenly go out and you lose power in part of your home! If that ever happens, it’s likely because you overloaded your circuit and tripped a breaker.

The good news is that preventing circuit overload in Forsyth County, GA is fairly easy. This post will cover all of the top ways to prevent electrical problems this holiday season:

  • Calculate your circuit load: Before you start hanging your lights, figure out your current circuit load. Most circuits are rated for 15 or 20 amps. If the holiday lights are going to put your circuit at 80 percent capacity, plug your light strand into a different circuit.
  • Switch to LEDs: Light-emitting diode (LED) lights draw far less electricity than standard bulbs. By switching to LEDs, you can rest easy knowing that you won’t overload your circuit this season. Plus, LEDs are 80 percent more cost efficient than standard holiday lights!
  • Install more circuits: Anyone who wants to go all out with holiday lights and décor should consider installing more circuits. Additional circuits rated for 20 amps will likely allow you to hang as many lights as you want without worrying about tripping a breaker.
  • Unplug unused appliances: Large appliances like TVs and stereo systems draw energy, even when they’re not turned on! To prevent tripping a breaker, unplug your unused appliances when you turn on your indoor lights. In addition to preventing circuit overload, this small measure will reduce the risk of an indoor fire and help with electrical safety in Forsyth County, GA.
  • Speak to an electrician: Finally, we recommend talking to a certified electrician before you go all out with your holiday lights. An electrician will let you know for certain how many light strands you can safely hang without risking overloading a circuit.

Call our team before you decorate this year!

Don’t just call any electrician for help—contact the pros at Duke Electric Co. These are a few reasons our customers call us when they need an electrical inspection to prevent circuit overload in Forsyth County, GA:

  • Fast response time: There’s no waiting around for your electrician to show up when you work with Duke Electric Co. We’ll send someone out as soon as possible to perform a thorough electrical inspection. Better still, we work quickly so you can get on with your holiday decorating.
  • Knowledgeable pros: We’ve been in business since 1964, so you can rest easy knowing you’re working with the most experienced electricians in the area. Trust us when we say there’s nothing we haven’t seen or done when it comes to electrical work.
  • Full-service company: There’s no reason to work with any other electrical company—we do it all! From standard inspections to rewiring your home to meet modern codes, we’re your go-to team for all of your electrical needs.

Even if you’ve already put up your exterior lights, it’s not too late to call our professionals to inspect your electrical system. A quick inspection will ensure electrical safety in Forsyth County, GA and prevent a circuit overload this season.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *